Automatic paint colorants tinting equipment , paint color pigment dispensing machine
Sample Show
Technical Data
| Application Range | water or oil colorants |
| Dispensing | Sequential |
| Capacity piston pump | 50 ml |
| Dispensing amount per minute | 0.25L |
| Minimum dispensing | 1/384 Y or 0.077 ml |
| Qty of canister | 16 stainless cans |
| Canister Capacity | each 2.3L |
| Can table Size | 35(L)*30(W)*54(H) CM |
| Dispensing difference | +/- 0.02ml each dispense |
| Machine Size | 805(L)*710(W)*1230(H) MM |
| Packing Size | 846(L)*758(W)*1398(H) MM |
Brief introduction
- The tinting systme is not only precisely controls the dispensing of ingredients to provide excellent finished paint product repeatability from batch to batch, but also can serve as a complete inventory management system.
- Since it dispenses by piston pump, any desired batch size is precisely dispensed as needed.
- The system handles everything from formula storage.With software modules included for raw material (colorants) and finished product inventory. It is the simple to operate and easy to maintain.
|
Features
- Ceramic valve structure, with good corrosion resistance and good sealing,stable and reliable.
- The rolling brush will clean seal ring of nozzle automatically.
- Simple electrical system,easy to maintain.
- Adjustable upward speed and dispensing speed of every colorant.
- The undispensed nozzle will dispense a little colorant in a specified time to keep the colorant from drying,which can effectively prevent the nozzle from blocking.
- Automatic stirring at set time, prevent the colorant inside canisters from subsidence.Piston pump ensure you precise measurement,free of calibration life-long.
- Driver software use the same Flink.dat file as CPS/Hero/Lenteq,and Formula.txt file as TECMEC,it’s compatible with worldwide major color software.
|
Software Function Introduction
| Driver 50 is a user Software Package developed for our range of Automatic Paint Dispenesr machines. The package will assist the user in carrying out the following operations: - Dispensing: Read the data from formula software and start dispensing;
- Manual Dispensing: The dispensing under this function can be done without formula software. The user can choose any colorants from the dropdown list, decide the amount for each colorant, and dispense here.
- Colorant management: manage all the datas of colorant.
- Debug: test each function of the machine manually;
- Pump calibration: calibrate the pulse data of each canister pump;
- Presentation management: translate the display language into your local language.
|
Our Service
- Training:You can send personnel to our factory for free training on the machine.
- Inspection: You can send inspectors to our factory for inspection or we self-inspect following the technical requirements mentioned in contracts.
- Testing of equipments: all our machines are tested before shipment. All machines are at its optimal state when shipped.
|
Warranty
- Limited Warranty: We provide a one year warranty for each equipment. Within guarantee period, we can help you judge the fault according to the failure phenomenon via Internet way and send replacement part to you.
- If the fault has been caused by mis-used or abnormal conditions of operation, repairs will be billed at a normal cost in this case. An estimate will be submitted before repair work is started in case requested.
|
